This article comes from the law firm of Prince Law. ATF to Institute Rulemaking Regarding Stabilizing Braces and Require Registration of Currently Owned Braces
In a 16 page draft copy of proposed rulemaking specifying “Objective Factors for Classifying Stablizing Braces”, the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has proposed entering into rulemaking to delineate the objective factors considered when “evaluating firearms with an attached stabilizing brace to determine whether they are considered firearms under the National Firearms Act (‘NFA’) and/or the Gun Control Act (‘GCA)” and the Department of Justice’s plan to “subsequently implement a separate process for current possessors of stabilizer-equipped firearms to choose to register such firearms in compliance with the NFA.”
While the proposed rulemaking has not yet been published in the Federal Register, it is expected to be published in the upcoming weeks and interestingly – seemingly in violation of the law – ATF is only providing a 14 day comment period, at least, pursuant to the draft copy. “Written comments must be postmarked and electronic comments must be submitted on or before [INSERT DATE 14 DAYS AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER].” It would not surprise me if the proposed rulemaking is published on December 24th, so that most interested individuals and businesses will be distracted by the holidays and unable to respond in the two week response period. To prevent against these types of shenanigans, the Gun Control Act mandates a 90 day comment period.
As more information becomes known, we will update this blog post or publish new ones, depending on the development.
If you or your company wish to file a comment in support or opposition to a notice of proposed rulemaking by a federal administrative agency, contact Firearms Industry Consulting Group today to discuss your rights and legal options.
Max Velocity Tactical has been compiling for some time lists of equipment/gear issues (and other observations) which commonly come up during their training classes for tactical rifle. Examples/excerpts below.
- This is the second class that someone has over inserted a magazine during a drill. What happens is the magazine is shoved so far into the mag well during a combat reload that the bolt hits the back of the magazine when the bolt released is pushed. This time it was a Magpul Gen 2. Pay attention during reloads, there is no reason to put that much force into seating a mag.
- Charging Handles- Get rid of the stock charging handles on your AR’s. Some of the ones that are being put on rifles are to easy to bind and the standard latch is to small. My recommendation is a BCM medium sized latch. It will make weapons manipulation easier.
- Ammo- A student had an issue during the malfunction drills. The bullet was getting pushed back into the case allowing the powder to dump into the chamber. When that happens the rifle will not go into battery. You then have to clean the chamber to get rid of the powder, a toothbrush works best. The reason this is happening is due to the type of ammo, .223 Rem in this case. Most .223 doesn’t have a good crimp on the bullet when it is manufactured. 5.56 ammo will have a crimp that should prevent this from happening. I have not seen this with any 5.56 marked ammo, only with .223 Rem. I have some Federal .223 and it does the same thing. I know everyone is trying to save money when they buy ammo for class. The problem is that going cheap can bite you in the ass. Just like with going the cheapest route with a rifle, cheap ammo can cause issues. Spend a little more and buy 5.56 marked ammo.
- Ambi-Safeties -We see this over and over. Students use the thumb to rotate the safety off and their trigger finger to rotate the safety on. This is an accident waiting to happen. When you get in a hurry your trigger finger can slip into the trigger guard and fire a round. That is not good. If you insist on having one on your rifle you have to ensure that your thumb rotates the safety on and off. My recommendation is to get rid of them.
- Blue Loctite is your friend. BUIS, sight mounts, flashlight mounts etc. need to have blue loctite on them. This will keep them from working loose and falling off when you need it the most.
- 80% lowers. I understand the attraction of these, especially for someone who is behind enemy lines. I have yet to see one at class that doesn’t have some sort of issue. The biggest problem I see is mag wells that aren’t to spec. A lot of times the jigs that come with them aren’t perfect either. Be aware of this.
- Lube your rifles. Almost at the end of class one of the students rifles just quit running. Added lube and the rifle started running again. He said he didn’t put any lube on it that morning.
- Not all charging handles are created equal. Especially doing malfunction drills. The standard CH that comes on AR’s are OK but are not the best. My recommendation is to get a BCM medium latch. It gives you more to grab when charging the rifle.
Get a quick adjustable sling. One that you can change the length on the fly with your support hand. If you choose to attach it where the extension tube meets the lower, make sure that it cannot rotate up and get in the way of running the charging handle.
There is quite a list of equipment issues, so if you haven’t spent much time with your gear, or even if you have, it’s worth a read to see what you might be missing.